Celanese Hostaform C13031 POM

描述

Celanese Hostaform C13031 POM pellets Description

Hostaform C 13031 Injection molding copolymer acetal material (POM-C material), contains mold release ingredients, unreinforced. High strength, high heat resistance, high rigidity and high hardness; good resistance to solvents, fuels and strong alkalis. Used in the production of fuel contact related parts.

Key Attributes

Product information
Celanese Hostaform C 13031
Manufacturer		Celanese Corporation
Part Marking Code		>POM material<
Material shape		POM pellets
Mater shape		Injection molding POM material
Polymer		Acetal Copolymer
Material attribute		·High heat resistance grade ·Hydrolysis stabilized grade ·Food contact grade
Specification		·FDA 21 CFR 177.2470 ·UL
Features		·High flow ·High hardness ·High stiffness ·High strength ·Alkali – resisting ·Antioxidant ·Chemical resistant ·Fuel resistant ·Solvent resistant ·Unfilled
Application		·Fuel contact applications
Additives		Mold releases
Physical properties	Standard	Value	Unit
Density	ISO 1183	1.41	g/cm³
Shrinkage flow	ISO 294	2.0	%
Shrinkage xflow	ISO 294	1.8	%
Water absorption 23℃ saturation	ISO 62	0.65	%
Humidity absorption 23℃ 50RH	ISO 62	0.2	%
Melt index 190℃ 2.16kg	ISO 1133	12	cm³/10min
Hardness	Standard	Value	Unit
Ball indentation hardness 30s	ISO 2039	156	MPa
Mechanical behavior	Standard	Value	Unit
Tensile modulus	ISO 527	3050	MPa
Tensile modulus yield 50mm/min	ISO 527	68	MPa
Elongation yield 50mm/min	ISO 527	8	%
Elongation break 50mm/min	ISO 527	28	%
Tensile creep modulus 1hr	ISO 899	2750	MPa
Tensile ceep modulus 1000hr	ISO 899	1450	MPa
Flexural modulus 23℃	ISO 178	3000	MPa
Charpy notch impact 23℃ 1eA	ISO 179	6.7	kJ/㎡
Charpy notch impact -30℃ 1eA	ISO 179	6	kJ/㎡
Charpy un-notch impact 23℃	ISO 179	200	kJ/㎡
Charpy un-notch impact -30℃	ISO 179	200	kJ/㎡
Thermal	Standard	Value	Unit
Heat Deflection Temperature 1.8MPa	IEC 75	107	℃
Heat Deflection Temperature 0.45MPa	IEC 75	161	℃
Vicat softening temperature 50℃/hr 50N	ISO 306	158	℃
Melting temperature 10℃/min	ISO 11357	170	℃
CLE flow	ISO 11359	1.1E-4	cm/cm/℃
Heat conductivity coefficient melt	Internal method	0.155	W/(m·K)
Thermal expension below Tg flow	ISO 11359	45	ppm/K
Thermal expension above Tg flow	ISO 11359	120	ppm/K
Electrical properties	Standard	Value	Unit
Volume resistivity	IEC 60093	1E+12	Ω·cm
Surface resistivity	IEC 60093	1E+14	Ω
Dielectric strength	IEC 60243	35	KV/mm
Dielectric constant 100Hz	IEC 60250	4
Dielectric constant 1MHz	IEC 60250	4
Dissipation factor 100Hz	IEC 60250	0.002
Dissipation factor 1MHz	IEC 60250	0.005
CTI	IEC 60112	600	V
Flammability	Standard	Value	Unit
Flame rating all color 1.5mm	UL94	HB
Flame rating all color 3.0mm	UL94	HB
Injection molding	Standard	Value	Unit
Dry temperature		100~120	℃
Dry time		3~4	hr
Water content control		≤0.15	%
Feeding zone temperature		60~80	℃
Zone1 temperature		170~180	℃
Zone2 temperature		180~190	℃
Zone3 temperature		190~200	℃
Zone4 temperature		190~210	℃
Nozzle temperature		190~210	℃
Cylinder temperature		20~30	℃
Melt temperature		190~220	℃
Mould temperature		80~120	℃
Injection speed		slow~moderate
Back pressure		40	bar
Hot runner temperature		190~210	℃

⚠️ The technical data sheet of Celanese Hostaform C 13031 POM is provided by Celanese corporation. If there is any difference, please refer to the official website of Celanese

Celanes Hostaform C13031 POM pellets Advantage

Fuel contact grade, As a polyoxymethylene material specially used for fuel vehicles, Hostaform C13031 POM has good chemical resistance to fuel and can be used to produce fuel-related parts. This material is widely used by many automobile manufacturers, such as Bosch, Ford, General Motors, Mercedes-Benz, Volkswagen Group, Li Auto, Renault, and Chrysler.
Food contact grade polyoxymethylene material. Celanese Hostaform C13031 POM material has obtained FDA 21 CFR 177.2470 certification and is a very safe food contact application material that can be used in food production transmission devices
Good processing performance. Hostaform C13031 has suitable processing conditions, a melt index of 12cm³/10min at 190℃ 2.16kg, which is suitable for processing complex and precise parts. At the same time, the material contains a release agent, which effectively reduces the material residue in the mold and improves the production efficiency of the product.
High heat resistance, Hostaform C13031 POM has better high temperature resistance than other products of the same level. The heat deformation temperature under the 1.8Mpa test environment reaches 107℃ and the melting temperature reaches 170℃, which is very suitable for high temperature application environment.
Strong mechanical properties. Celanese C 13031 POM has higher strength and hardness, with a tensile modulus of 3050 MPa and a flexural modulus of 3000 MPa, under a test environment of 23°C. Ball indentation Hardness 30s is slightly higher than similar products, reaching 156MPa. 13031 POM is suitable for the production of products with high requirements for strength and hardness.

Why choose ATS as Celanese Hostaform C13031 POM pellets supplier?

Leading copolymer acetal resinb pellets supplier(POM-C material), 10+ years of experience of plasticizing materials factory
Fastest Arrival, with warehouses in multiple ports
1,000+ types of resins are available, and we have cooperated with large petrochemical groups for 10+ years
Free Samples for production testing
Wholesale price, even a piece of goods is based on the wholesale price