Descripción
Sabic B5628 HDPE pellet Description
Sabic high-density polyethylene resin pellets (HDPE material) B5628 are specifically designed for the production of blow-molded plastic bottles. They have good flow properties, high rigidity and impact resistance, and environmental stress cracking resistance (ESCR). Sabic B5628 HDPE material is commonly used in the production of small blow-molded plastic bottles that are not food contact grade.
| Sabic ® HDPE B5628 |
| Product information |
| Manufacturer |
Saudi Basic Industry Corporation |
| Other Certificates |
MSDS |
| Part Marking Code |
>HDPE material< |
| Material Shape |
HDPE Pellets |
| Process |
Blow molding HDPE pellets |
| Material Attribute |
·Easy flow ·Higher stiffness ·Good combination of ESCR and sufficient impact strength. |
| Features |
Small packaging bottles for non-food use |
| Physical properties |
Standard |
Value |
Unit |
| Density 23°C |
ASTM D1505 |
955 |
kg/m³ |
| 190°C & 2.16 kg load |
ASTM D1238 |
0.32 |
g/10min |
| 190°C & 21.6 kg load |
ASTM D1238 |
24 |
g/10min |
| Mechanical behavior |
Standard |
Value |
Unit |
| Tensile Strength at Yield, 500mm/min, Type IV bar |
ASTM D638 |
30 |
Mpa |
| Tensile Elongation @ Break, 10mm/min, Type IV bar |
ASTM D638 |
>903 |
% |
| Flexural Modulus Tangent – 16:1 span:depth, 0.5 in/min |
ASTM D790 |
1120 |
Mpa |
| Izod Impact @23°C |
ASTM D256 |
148 |
J/m |
| Durometer Hardness (Shore D) |
ASTM D2240 |
58 |
|
THERMAL PROPERTIES
|
Standard
|
Value
|
Unit
|
| Vicat softening temperature Loading 1, Rate A |
ASTM D1525 |
127 |
°C |
| Heat deflection temperature |
Standard |
Value |
Unit |
| 66 psi, Method A |
ASTM D648 |
70 |
°C |
⚠️The technical data sheet of Sabic B5628 high density polyethylene material from Saudi basic industry, if there are differences, please refer to the official website of Sabic
Sabic B5628 HDPE pellet Advantage
- Good processing performance. As a HDPE material specially used for the production of small blow-molded plastic bottles, B5628 has a melt index of 0.32g/10min at 190℃ and 2.16kg test environment. It has a medium flow rate and is suitable for most blow-molded bottle production equipment. The production conditions are relatively broad.
- Good mechanical properties. Sabic H5628 HDPE material has an Izod impact of 148J/m and a flexural modulus of 1120MPa at 23°C. It has good impact resistance and rigidity and is suitable for the production technology requirements of most small bottles.
Why choose ATS as Sabic B5628 HDPE pellets supplier?
相关